How to successfully polish every time!

How to successfully polish for a spotless summer:

Spider webs, angel hair, swirls mark . Several terms to define those nasty little scratches that appear in a beautiful summer sun on the hood of your car! Fortunately, you can get rid of it with a good polish as these are just imperfections in the clear coat that covers your paint. With the right tools, you should be able to make them go away without a problem.

Here is our guide to help you polish your car by using best car polisher for beginners yourself that will undoubtedly restore your car to its original shine!

If necessary, refer to the images available by clicking on the main image.

Warning . Although polishing is not complicated, it does require the use of machines capable of damaging the finish of your paint. If you have any doubts, we advise you to do business with a professional.

Wash your car

The first step is, of course, cleaning the car. To achieve optimum polishing you need the cleanest surface possible.

Rinse the car with water to remove dust and mud, and when the dirt no longer comes off, it’s time to soap the car. We recommend the use of a sea sponge and a neutral pH soap.

To wash the car, soap and rinse one section at a time. Start with the roof. Finish with the wheels and the exhaust pipes.Ideally, use a brush for these elements.

Bar or clay loaf and drying

Once the car is washed and rinsed, run a bar of clay over the vehicle, so as to remove the impurities from the paint. A what? A bar or bar of clay looks like a bar of bathroom soap. We pass it on the car with the help of a lubricant. It is this little bar that will remove chemical, organic and physical contaminants that have become encrusted in the paint. Our expert uses a rubber “clay bar”. They are less messy, more durable, and can be lubricated with soapy water.

When this task is complete, rinse the car again, and dry the bodywork using a microfiber towel. You can also use a chamois cloth. Microfiber towels are less likely to damage the finish.

And now we polish

To remove the “cobwebs”, it is recommended to do two polishes. The first is to apply the polish using an aggressive pad, while the second is to apply the polish using a soft pad.

Before you begin, we recommend that you mask plastic trim, such as window sills, to avoid damaging them.

To polish, you need a polisher or an orbital machine. Aggressive tampons are usually microfibers. Apply the polish to the pad, and rub the pad over the paint to spread the product. When the product is well spread, start your machine. Polish one section at a time, varying the direction.

Once the section is polished, remove the excess product with a clean microfiber towel.

After this “aggressive tampon” step, 95% of the “cobwebs” will have disappeared. However, the finish of the paint will exhibit spots that appear to project deep into the paint. Called “holograms” by professionals, they can be removed with a gentle polish

Soft polishing

We repeat the previous step in the same way, but this time with a… soft tampon. They are usually foam and have a more uniform surface.

Warning. Some polishes can be used with all types of pads, while others are designed for a specific type. Be sure to read the recommendations on the polish packaging before applying it.

Application of protection

Once the gentle polish is complete, your car’s finish should no longer show major flaws. If some stains persist despite everything, don’t go too far. Your finish may be damaged beyond what a polish can fix.

After polishing, your vehicle’s paint is essentially exposed to the air, without protection. It is therefore recommended to finish polishing by applying a wax or sealant to protect your finish, and to increase its shine.

Our expert recommends the application of a sealer, which requires less effort, and which offers better protection than a conventional wax.

Add a Comment

Your email address will not be published. Required fields are marked *